현재 위치

  1. home
  2. product
  3. 에어드라이어

Desiccant Air Dryer (Zero purge Loss)


               

 




                  


                    Blower Heater Zero Purge Loss Type Desiccant Air dryer


 

                             It is the desiccant equipment to fill high alumina gel having mositure and chemical attraction into the

                             tank in order to supply the pressure air of saturation come from air compressor under high dry status,

                             A typical regenerative dryer consists of two towers charged with activated alumina desiccant.


                             One tower dries air, while the desiccant in the other toweed with low pressure and low pressure

                             and low humidity air.


                             Often ,heat is added to assist the regeneration process. In this design, a small amount of the dried

                             air ( from the drying tower ) is expanded to near atmospheric pressure in the regenerating tower.
                             The dry air becomes super dry on expansion, and readily absorbs the moisture from the saturated

                             desiccant bed

                     


                              Like this, the machinery to reiterate the dehumidification and regeneration  under allowed time and

                              then, supply the dried air is called as desiccant air dryer.


                              Among them,  In order to regenerate the desiccant,

                              An electronic heater and a boosting blower were installed,
                              A special type of dryer that dries without any purge of compressed air.
                              It is called "Bower heater zero purge loss type desiccant air dryer".

 

 

                        


 

                                  -   Very economical because there is no loss of compressed air.      

                                  -   Zero purge loss process, Silent operation possible due to no noise.

                                  -   The life of the heater and desiccants are greatly extended by the use of low density heater.

                                  -   Dew point meter enables efficient and easy operation.

                                  -   Making special specifications for your working site environment.



   
   

 

   
    



                   





Model

(New)


 Capacity

(Nm3/hr)

 

In/out

                

 

Heater


 

Blower

 

Dimension ( mm )


 

Weight

 

 Inch

 (A)

 Kw

 Kw

 Width

 Depth

 Height

SHN 730 

  730

 2

  50

  8.7

1.5

 1,600

1,600

 2,800

1,440

 SHN 950 

  950

 2-1/2

  65

 11.3

 2.2

 1,800

 1,700

 2,800

 1,700

 SHN 1200 

1,220

 2-1/2

  65

 14.5

 2.2

 2,100

 1,800

 2,900

2,060

 SHN 1500

1,530

 3

  80

 18.5

 3.7

 2,400

 1,900

 2,900

2,200

 SHN 1800

1,870

 3

  80

 22.2

 5.5

 2,600

 2,000

 2,900

 2,470

 SHN 2300

2,300

 3

  80

 27.4

 5.5

 2.800

 2,100

 2,900

 2,690

 SHN 2600

2,600

 4

 100

 31.3

 7.5

 2,850

 2,100

3,000

 3,500

 SHN 3000

3,000

 4

 100

 46.0

11.0

 3,880

 2,000

 2,900

 4,000

 SHN 3600

3,600

 4

 100

 50.5

11.5

 3,880

 2,100

3,000

 4,390

 SHN 5000

5,100

 6

 150

 60.7

12.6

 3,880

 2,400

 3,000

 5,850

 SHN 6000

6,000

 6

 150

 60.0

15.0

 4,000

 2,500

 3,000

 6,300

  SHN 6900

6,970

 6

 150

 83.0

15.3

 4,000

2,500

 3,100

 7,400

  SHN 7600

7,650

 6

 150

 91.0

 15.3

4,200

 2,600

 3,100

 8,200

  SHN 9100

9,170

 6

 150

 109.3

 18.5

 5,100

 2,700

3,100

9,600

  SHN 10900

10,900

 8

 200

 121.4

 18.5

 5,200

2,700

3,200

11,400

 SHN 11800

11,890

 8

 200

 141.7

 18.5

 5,800

3,000

 3,200

12,360

 

                                                   ※  Capacity based on inlet temperature 38 ℃ , working pressure 7kgf/cm2G , Dew point -40 ℃.

                                                   ※  Standard desiccant is the activated alumina gel.

                                                   ※  This Dryer is test acquired by KOSHA ( Korea Occupational Safety and Health Agency )

                                                   ※  Be careful that  above specification can be changeable at any time without any prior notice

                                                         in order to to upgrade the quality and performance of the products.